A105 is an ASTM specification for steel forgings, primarily for carbon steel forged pipe components. The type of carbon steel wrought alloy involved is a low carbon, manganese and silicon steel similar to the AISI 1330, but with a lower manganese content.

A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 ″ - 28 ″, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.

X42 Carbon steel round bar is the round bar with steel grade of X42.

Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

A36 is a low-carbon steel containing manganese, phosphorus, sulfur, silicon and copper. A36 has good weldability and high yield strength. A36 carbon steel bar is commonly used as a variety of structural steel parts.

A572 steel bars have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

Flat steel refers to steel with a width of 12-300mm, a thickness of 3-60mm, a rectangular cross-section and a slight blunt edge. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked sheets. Main application: Flat steel can be used as a finished material to make hoop iron, tools and mechanical parts, and it can be used as a house frame structure and escalator in construction.
Galvanized flat steel refers to galvanized steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular section and a slight blunt edge. Galvanized flat steel can be used as a finished product to make hoop iron, tools and mechanical parts, and it can be used as a building frame structure, escalator and so on.

Flat steel refers to steel with a width of 12-300mm, a thickness of 3-60mm, a rectangular cross-section and a slight blunt edge. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked sheets. Main application: Flat steel can be used as a finished material to make hoop iron, tools and mechanical parts, and it can be used as a house frame structure and escalator in construction.
Galvanized flat steel refers to galvanized steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular section and a slight blunt edge. Galvanized flat steel can be used as a finished product to make hoop iron, tools and mechanical parts, and it can be used as a building frame structure, escalator and so on.

Flat steel refers to steel with a width of 12-300mm, a thickness of 3-60mm, a rectangular cross-section and a slight blunt edge. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked sheets. Main application: Flat steel can be used as a finished material to make hoop iron, tools and mechanical parts, and it can be used as a house frame structure and escalator in construction.
Galvanized flat steel refers to galvanized steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular section and a slight blunt edge. Galvanized flat steel can be used as a finished product to make hoop iron, tools and mechanical parts, and it can be used as a building frame structure, escalator and so on.

Square steel bar, solid bar. Hot-rolled square steel refers to steel that is rolled or processed into a square section. Square steel can be divided into hot-rolled and cold-rolled; Cold-drawn square steel refers to cold-drawn steel that is forged in a square shape.

Square steel bar, solid bar. Hot-rolled square steel refers to steel that is rolled or processed into a square section. Square steel can be divided into hot-rolled and cold-rolled; Cold-drawn square steel refers to cold-drawn steel that is forged in a square shape.